Titanium Gr.2

Titanium Grade 2
UNS R50400

Information Coming Soon

ASME Boiler and Pressure Vessel Specifications
Sheet/ Plate Forgings Weld Fittings Rod and Bar Tubing - Welded/ Smls Pipe - Welded/ Smls Bolting- Bolts/ Nuts Filler Metals
SB265 SB381 SB363 SB348 SB338/ SB338 SB337/   SB337 SB348-Ti2/ SB348-Ti2 ERTi-2 



ASME Boiler and Pressure Vessel Chemical Requirements for Sheet/Plate
Note: all percentages max unless otherwise specified
Ni C HAB Fe O ResidualsCDE (max - each) ResidualsCDE  (max - total) Ti
0.03 0.10 0.015 0.30 0.25 0.1 0.4 RemF



ASME Boiler and Pressure Vessel Mechanical Properties for Sheet/Plate
Tensile Strength, Min ksi Yield Strength, (0.2% offset), Min, ksi Min. Elongation in 2", % Density lb/in³
50 40 20.0 0.163


Notes:
A - Lower Hydrogen may be obtained by negotiation with the manufacturer
B - Final product analysis
C - Need not be reported
D - A residual is an element present in a metal or an alloy in small quantities and is inherent to the manufacturing process but not added intentionally. In titanium these elements include aluminum, vanadium, tin, iron, chromium, molybdenum, niobium, zirconium, hafnium, bismuth, ruthenium, palladium, yttrium, copper, silicon, cobalt, tantalum, nickel, boron, manganese, and tungsten.
E - The purchaser may, in his written purchase order, request analysis for specific residual elements not listed in this specification. The maximum allowable concentration for residual elements shall be 0.1% each and 0.4% maximum total.
F - Element shall be determined arithmetically by difference

CMC Letco Ind shall not be held liable for any type of damages resulting from the use of this information. The end user assumes all risk and liability in connection with the use of this information.